Grilles de sécurité PS-OFF

SATECH, the specialist in machine guarding, presents the FastGuard Series industrial machine guarding systems. The FastGuard Series is a modular guarding system without posts and with a very quick assembly. It consists of panels with a 30x30 mm (FastGuard 30) or 20x20 mm (FastGuard 20) frame, a self-supporting clamped fork leg and a top connection. We have designed it to combine ease and speed of assembly with versatility and cost effectiveness. FastGuard Series Panels: Features: - Frame: 30 x 30 mm (FastGuard 30) or 20 x 20 mm (FastGuard 20) - Mesh size: 22 x 100 x 3 mm - Paint: Powder (for indoor use). Dimensions : - Width: 200, 300, 700, 800, 1000, 1200, 1500 mm - Heights: 1500, 1900, 2080, 2480 mm. Posts FastGuard series: Characteristics: - Bases: punched with 4 fixing points on the ground - Paint: Powder (for interior use) - Door posts: 40 x 40 x 2 mm / 60 x 60 x 2 mm. Dimensions : - Height of the protection: 1640, 2040, 2220, 2620 mm. Colours: Panels and posts are painted with epoxy polyester powder (for indoor use) in the "standard" colours RAL 9005 and 1021 or 7035. Non-standard colours can be produced on request to meet any special requirements. All our products comply with European standards (International Standard EN ISO 14120 "General requirements for the design and construction of fixed and movable guards", International Standard EN ISO 13857).

Satech renews its range of sliding doors with a new telescopic guide with very low friction. The two new generation guides, which equip the TX sliding doors, ensure easy sliding and great stability. The new telescopic guides are suitable for all types of frames and panels and are very easy to install. Several widths are available: 800 and 1000 or 1200 and 1500 with roller support. Each TX Telescopic Door is supplied with a high visibility handle.

Pre-crimped woven wire mesh We manufacture woven wire meshes in multifaceted variants for sifting, protecting, carrying, decorating, and for many other applications. There are both technically and optically interesting grid types apart from the generally known double and lock crimped meshes. Woven wire meshes are manufactured from pre-crimped wires. The wires are either crimped with crimper wheels before the weaving or, especially in the case of thick wires, crimped in a pressing process. The kind of crimping determines the type of weave. ISO 4783/3 describes the standard types of weave. The respective crimping tools (crimper wheels/press tools) must be on hand. Dorstener Drahtwerke has tools available for all standard dimensions. Should we have to make tools, this can be done within a few days. Are costs of primary importance, woven wire meshes are made from iron wire and galvanised wire. If corrosion or heat resistance are required, stainless steels such as 1.4301, 1.4401, 1.4841 or others are used. Abrasive sifting materials require the employment of spring steel. A summary of the properties of the different materials can be found in our PDF: Materials. Forms of delivery: The requested width and length of the wire meshes are either woven or cut from warehouse goods. The maximum width is 2,000 mm. The length can be chosen as required. For logistic reasons however, for wires with a diameter of more than 3.0 mm, it should not be much more than 3,000 mm.