Presentation - FERRUM s.r.o.
Manufacturing of steel reinforcement rods, rolled wires, bracing rods, concrete reinforcement, steel reinforcement wire
- metal sheet roofing, metal roof tiles, metallic grates
- bending of wires
Manufacturing and sale of beer sets
Trading with construction materials, nuts, bolts, washers, nails, hooks
Sale of metallurgical materials: profile rods, wires, metal sheets, tubes, pipes
Ecological liquidation of crashed cars, liquidation of waste metal
Operation of a new line for the processing of reinforcing bars
*CNC flame cutter – MICROSTEP
- working area 12 x 3 m and a shaft for flame cutting of tubes and quadrangular sections
- the machine allows for marking with plasma and centre punching
- flame cutting with oxy-acetylene welder up to the thickness of 150 mm
- plasma cutting of non-alloyed steel of the thickness from 0.5 to 60 mm, the separating cut of 0.5 to 80 mm
- also stainless steel could be cut
- plasma burner is fixed to a rotator for angular cuts, it is possible to cut scarves, e.g. for welding
- rotator makes possible cutting of inlets into bottoms
- the machine is equipped with a positioner for cutting inlet into tubes (D 30-300 mm)
- flame cutting of quadrangular sections with prepared scarf for welding, it makes possible to cut “round the corner”
- flame cutting of cutouts, including material
*CNC press brake TruBend 5320*
- pressure 320 t
- common beveling length up to 4 m, max. 4.4 m
- tools for metal sheet thickness – 1.5 mm … in the length of 3 m
- 2,3,4,5,8 in the length of 4 m
- maximum thickness for materials of the strength up to 400 MPa – thickness 10 mm in the length of 4 m
- thickness 12 mm in the length of 3.5 m
- we can use the upper tool up to the thickness of 12 mm
- maximum thickness for materials of the strength up to 700 MPa and stainless steel – thickness 6 mm in the length of 4 m
- thickness 8 mm in the length of 3 m
- thickness 10 mm in the length of 2.4 m
- thickness 12 mm in the length of 2 m
- we can use the upper tool up to the thickness of 10 mm
- metal sheet beveling, including material
- metal pressing, CNC flame cutting
- plasma cutting
- sections bending using COMPAG 305 machine
Bending – tubes, L-, U-, T-sections, strap steel, flat steel, quadrangular sections, hollow sections, continuous transition to various bending diameters (radii) is possible
- laser cutting of sheet metal, closed and open sections using the ADIGE-SYS LT COMBO FIBER machine
- cutting of sheet metal, tubes, shaped sections – quadrangular sections, C-, L-, U-sections, strap steel
Sales of spare parts for cars (car parts).
Executives - FERRUM s.r.o. Buy the executives list from same sector
Pan Stanislav Karlík
Principal Executive/Proprietor (Jednatel, společník)
General Information - FERRUM s.r.o.
Certifications
| Type: | ISO 9001: 2015 |
|---|
Location - FERRUM s.r.o.
Other addresses
Key figures - FERRUM s.r.o.
Turnover
For more information, please log inOperating income
For more information, please log inNet profit
For more information, please log inParticipation - FERRUM s.r.o.
Shareholders
For more information, please log inActivities - FERRUM s.r.o.
Main activities within the Kompass classification
Other classifications (for some countries)
NACE CZ (CZ 2008) : Výroba drátěných výrobků, řetězů a pružin (2593)
NACE Rev.2 (EU 2008) : Manufacture of wire products, chain and springs (2593)
NACE CZ (CZ 2008) : Velkoobchod s rudami, kovy a hutními výrobky (4672)
NACE Rev.2 (EU 2008) : Wholesale of metals and metal ores (4672)
NACE CZ (CZ 2008) : Výroba kovových konstrukcí a jejich dílů (2511)
NACE Rev.2 (EU 2008) : Manufacture of metal structures and parts of structures (2511)
NACE CZ (CZ 2008) : Velkoobchod s odpadem a šrotem (4677)
NACE Rev.2 (EU 2008) : Wholesale of waste and scrap (4677)
ISIC 4 (WORLD) : Manufacture of other fabricated metal products n.e.c. (2599)
ISIC 4 (WORLD) : Wholesale of metals and metal ores (4662)
ISIC 4 (WORLD) : Manufacture of structural metal products (2511)
ISIC 4 (WORLD) : Wholesale of waste and scrap and other products n.e.c. (4669)
NACE Rev.2.1 (EU 2025) : Wholesale of metals and metal ores (4682)
NACE Rev.2.1 (EU 2025) : Manufacture of metal structures and parts of structures (2511)
NACE Rev.2.1 (EU 2025) : Wholesale of waste and scrap (4687)
NACE Rev.2.1 (EU 2025) : Manufacture of wire products, chain and springs (2593)
Secondary activities within the Kompass classification
- Kitchenware, wooden
- Flooring, roofing and wall coverings, plastic, for the building industry
- Equipment for building sites, plastic
- Tableware, plastic
- Compressed and liquefied gases. Chemicals for refrigeration
- Asphalt, tar and bituminous products
- Flats, steel, hot rolled
- Sheets and strips, steel, hot rolled
- Bars, steel and rolled steel
- Sections, steel and rolled steel
- Flats, steel, cold rolled
- Sheets and strips, steel, cold rolled
- Iron and steel, drawn, compressed and turned. Tube rounds and squares
- Sheet iron and steel, coated or magnetic
- Iron and steel wire rod. Drawn steel wire, reinforcing steel
- Semi-manufactured products, aluminium and its alloys
- Semi-manufactured products, copper
- Semi-manufactured products, zinc
- , Non-structural metal fabrications for roofs and coverings
- Non-structural metal fabrications for water mains
- Panels and sandwich panels, metal
- Decorative building elements, metal
- Grilles, fencing, metal
- Staircase and staircase equipment, metal
- Balustrades, railings and safety guards, metal
- Pipes, tubes, ducts and pipelines, ferrous metals
- Screws, non-turned, metal
- Bolts , metal, non-turned
- Nuts, metal, non-turned
- Washers, metal, non-turned
- Fibre cement products
- Concrete products, precast
- Ceramic roofing tiles
- Metal pipework services
- Metal machining contractors
- Machining services for metal wire
- Bending services for metals
- Metal waste collection and recycling services
- Wholesale trade
- Scrap and waste (trade)
Follow us - FERRUM s.r.o.
| Discover more on our Website | Website available |
|---|
Kompass membership
| Kompass ID? | CZ021112 |
|---|
Legal information - FERRUM s.r.o.
| Type | Headquarters |
|---|---|
| Year established | 1993 |
| Activity (CZ08) | Výroba drátěných výrobků, řetězů a pružin (2593) |
| Corporate capital | Information available as an option|
| Registration No. | Information available as an option |
| VAT no |
Information available as an option
|
| No employees | 100-249 Employees |
Other Companies recommended by Kompass:
Looking for new B2B Leads ?
Purchase a Company list with the executives and contact details
You might also like:
Need help finding the right information ? Let us guide you to the best solutions !
I am looking for :
The shortest path to your future customers and suppliers
"I would recommend EasyBusiness to all sales teams."
All-in-one prospecting solution designed to improve your productivity
Find your next customer today! Your shortcut to faster, more targeted and successful lead generation
Register for free and turn reliable data into real business opportunities
Your data is used to recontact you or send you communications and may be processed by Kompass, for the purposes of legitimate interest (Article 6 1.f of the GDPR).
You may object to its processing by email: dpo@kompass.com.
Find out more: see our privacy policy.