Precision ring

Material: Housing igumid® G. Bearing seat iglidur® W300. Version: black. Note: The rod end has very high rigidity under alternating stresses, it is insensitive to dirt, dust and lint, and is both corrosion and chemical resistant. It is ideal for rotary, oscillating and linear movements. The connection dimensions comply with DIN ISO 12240 series K. Tolerances: The bore of the inner ring has an E10 tolerance. The shaft tolerance should be between h6 and h9.

Material: Casing drop-forged steel, tempered. Version: Galvanized. Internal clearance 15 - 40 µm. Rod ends are primarily used where movement processes are transmitted and there is no exact alignment. Version with internal thread: The hardened ball bearing is long-term greased and sealed with cover washers. The connection dimensions comply with DIN 648 Form Series KA. Version with external thread: The hardened ball bearing is long-term greased and sealed with cover washers. The connection dimensions comply with DIN 648 Form Series KA.

Material: Housing steel. Version: Housing black oxidised. Note: The axis height of the spindle bearings is matched to the floating bearing units 24074 and the housings for flange nuts 24070. The housings may be screwed on from above or below and pinned with two taper pins or cylindrical pins. Reference faces on both sides ease unit alignment. Ready to install fixed bearing units with double row preloaded high-accuracy bearings and a 60° thrust angle. They accept both radial and axial forces from both directions and, due to preloading provide for highest rigidity, concentricity, precise tool positioning and repeatability.