BALANCES ET BASCULES KERN

The CA 6651 test adapter for electric vehicle charging stations is simple to use. It can be interfaced in series on the output of a charging station and allows you to access the various measurement points on a type-2 socket to perform electrical tests. The CA 6651 can be used first to perform the following tests: - The functional test to check that the PE protective conductor is correctly connected to the earth and that the phases are present - Verification of the electric vehicle charger station’s safety; to do this, you need to use the adapter with a multifunction tester (e.g. CA 6117, CA 6131, CA 6133 or MX 535) : Mains test, earthing test, RCD test, insulation measurement The CA 6651 then checks whether the charging station is operating properly by simulating a vehicle in various states: connected, not connected, charging, etc. To check that the signal is transmitted correctly between the charging station and the CA 6651, you need to use a handheld oscilloscope such as the Handscope (signal waveform, amplitude, pulse width, etc.)

Designed for checking safety on electrical installations, the C.A 6131 and C.A 6133 testers can be used to test new installations before powering up, check existing installations, whether in operation or not, and troubleshoot malfunctions. For certification organizations, these portable instruments are simple, effective and, above all, compliant with the applicable standards. The C.A 6131 and C.A 6133 are designed to be exceptionally simple to use. All the measurements and functions are accessible directly on the front panel of these compact, lightweight instruments. Their terminal strips include explicit markings to prevent any risk of connection errors. The backlit LCD screen is particularly easy to read. A visual indication of the test result (OK/NOK) is clearly visible on the instrument. To make them as easy to use as possible, these new testers offer several solutions for hands-free working: a magnetized casing, a neck strap and built-in "feet". A continuity rod can be used to access remote measurement points such as lighting. A three-pole cable has also been developed for direct measurements on 2P+E sockets. A remote control probe (option) can be used to start and store the results of any remote tests. An external clamp can be connected to the instrument for current measurements. The C.A 6133 is equipped with extra functions: - Save time with automatic test sequences such as: AUTO-RCD, LOOP–RCD–INSULATION - Current measurement with the MN73A clamp is particularly simple: it is recognized on connection, as is the measurement range. - Organized storage: it is possible to store the measurement results from up to 30 sites with 99 tests each! The IT-Report ANDROID application can be used to transfer the test results stored in the testers onto a tablet or smartphone via Bluetooth. Test reports are then generated and sent automatically by email or simply stored for processing later on.

Highlights Pointed glass tip: penetrating, fibre junction, perforating Waterproof, lightweight and pocket-sized Calibration in 30 s, extremely simple and intuitive Ultra-fast response time Description The CA 10002 pH tester is ideal for many applications in the agri-food sector: Dairy product fermentation testing Inspection of cheeses through to the curing stage Milk quality testing It is also suitable for measuring soil pH in agriculture. Its accuracy and quick response meet the requirements of the first-level tests in R&D Measurement range : pH 2.00 to 12.00 pH Temperature 0.0 to 80.0 °C / 32.0 to 176.0 °F